Dry block calibrators

Calibration furnace PYROS-375

The Pyros-375 calibration furnace is used to check and calibrate thermoelectric and resistance sensors in the range from ambient temperature to 375 ° C. It has a well with a diameter of ø25 mm and... temperature range: (30 ÷ 375) °C
resolution: 0,1°C
pit depth: 150 mm
power supply 230VAC 600W
recalibration certificate Catalogue card +

Calibration furnace PYROS-650

The Pyros-650 calibration furnace is used to check and calibrate thermoelectric and resistance sensors in the range from ambient temperature to 650 ° C. It has a well with a diameter of ø25 mm and... temperature range: environment temp. up to 650°C
resolution: 1°C
pit depth: 150 mm
power supply 230 V AC / 115 V AC
recalibration certificate Catalogue card +

Calibration furnace P-300

The P-300 portable calibration heater allows you to check temperature sensors in the range of 33 to 300 ° C. Thanks to its small dimensions, it can be used on site for quick checking and... portable and easy to use
thermowell immersion length: up to 100mm
measuring range: 33 ÷ 300°C
stability: ±0,3°C
stabilization time: approx. 5 min. Catalogue card +

Calibration furnace QUARTZ-35

The Quartz-35 calibration furnace is used to check and calibrate thermoelectric and resistance sensors in the range of -50 ° C, from ambient temperature to 150 ° C. It has a well with a diameter... portable calibration stove
pit depth: 135 mm
temperature range: (-50 ÷ 150) °C
stability: ±0,3°C
stabilization time: approx. 6 min.
internal cryostat: Peltier module Catalogue card +

Calibration furnace SOLAR

Solar calibration furnace is used to check and calibrate thermoelectric and resistance sensors in the range from 200 to 550 ° C. It has a well with a diameter of ø44mm and a depth of... portable calibration stove
pit depth: 155 mm
temperature range: (200 ÷ 1100)°C
stability: ±0.3°C at 1000°C
stabilization time: approx. 20 min. Catalogue card +

Calibration furnace BB 500

The BB-500 portable calibration heater allows you to check pyrometers in the temperature range of 30 to 500 ° C. Thanks to its small dimensions, it can be used on site for checking stationary pyrometers.... portable calibration stove
emissivity factor: 0,95
resolution: 0,1 ºC
temperature range: (30 ÷ 500) ºC
operating temperature: (0 ÷ 40) ºC
dimensions [mm]: 180x114x233; weight [kg]: 2,70 Catalogue card +

Calibration bath FLUID 100/200

The Fluid calibration bath is used to check and calibrate thermoelectric and resistance sensors as well as glass, bimetallic and gas thermometers. It comes in two versions: - Fliud 100, temperature range -10 ÷ 125°C - Fluid... portable calibration bath
pit depth: 150 mm
stability: ±0.02°C at 100°C
radial / linear irregularity: ±0,03/±0,03 °C Catalogue card +

Calibration furnace PULSAR-35Cu

The Pulsar-35CU calibration furnace is used to check and calibrate thermoelectric and resistance sensors in the range of up to 600 ° C. It has a well with a diameter of ø35 mm and a... temperature range: environment temp. up to 600°C
resolution: 0,01/0,1°C
pit depth: 190 mm
power supply 230 V AC / 115 V AC
recalibration certificate Catalogue card +

Calibration furnace PULSAR-80Cu

The Pulsar-80CU calibration furnace is used to check and calibrate thermoelectric and resistance sensors in the range up to 550 ° C. It has a well with a diameter of ø60 mm and a depth... temperature range: environment temp. up to 550°C
resolution: 0,01/0,1°C
pit depth: 275 mm
power supply 230 V AC / 115 V AC
recalibration certificate Catalogue card +

Calibration furnace BX 150

The BX-150 portable calibration heater allows you to check temperature sensors in the range of 33 ° C to 300 ° C. Thanks to its small dimensions, it can be used on site for quick... portable and easy to use calibration stove
measuring range: 33 ÷ 300°C
power supply 230V
dimensions/weight: 180 x 114 x 233 mm / 2,20 kg Catalogue card +