Replaceable measuring insert

TOPGB-11 / TTJGB-11 / TTKGB-11

This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological... +150°C max. temperature
Ø9 mm of thermowell diameter
mounting method: threaded connector
temperature transmitter: 4-20mA, mounted into head connection
sensing element: Pt100, Fe-CuNi /J/, NiCr-Ni /K/
options: head mounted local display LED Catalog card Manual / DTR +

TOPGN-11 / TTJGN-11 / TTKGN-11

This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological... max. temperature: +550 °C
thermowell: Ø9; Ø11 mm
mounting method: threaded connector, M27x2; G1/2"
temperature transmitter: 4-20 mA, mounted into head connection
optional functions: local display mounted into head connection
head mounted local display LED Catalogue card Manual +

TOPSW-11, 21, TTJSW-11, 21, TTKSW-11, 21

Sensor suitable for temperature measurements, primarily in industrial pressure tanks, in all these places where mounting of a threaded process connection would be problematic. The temperature sensor design (replaceable measuring insert) is suitable for various... max. temperature +570 °C
RTD, TC type: Pt100,Fe-CuNi/J/, NiCr-Ni/K/
thermowell diameters Ø18, Ø24 mm
mounting - thermowell suitable for welding
head mounted transmitter 4...20mA
head mounted local display LED Catalogue card Manual +

PTTJUO-15, PTTKUO-15, PTTNUO-15

This sensor is suitable for temperature measurements of media with slow temperature changes. Sensor sheath made of  heat-resistant and creep-resistant steel enables temperature measurement of e.g. Burned gases and exhaust gases in  furnaces. max. temperature +1200 °C
TC type: Fe-CuNi /J/, NiCr-Ni /K/, NiCrSi-NiSi /N/
thermowell diameter Ø22 mm
mineral insulated W2 1 or 2 J, K, N Ø 6mm
control hole Ø4 mm for thermocouple Manual +

TOPGN-54, TTJGN-54, TTKGN-54

This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological... max. temperature +600 °C
thermowell Ø6; Ø8; Ø9; Ø10 mm
mounting method: thread connector M20x1,5; G1/2"
temperature transmitter mounted into connection head, 4÷20 mA
local LED display mounted into connection head
sensing element: Pt100, Fe-CuNi /J/, NiCr-Ni /K/ Catalogue card Manual +

TOPP-11, TTJP-11, TTKP-11

This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological... max. temperature +900 °C
thermowell diameter: Ø12; Ø14; Ø15 mm
mounting - compression fitting, mounting bracket
head mounted transmitter 4÷20mA
head mounted local display LED
sensing element: Pt100, Fe-CuNi /J/, NiCr-Ni /K/ Catalogue card Manual +

TOPT-11, TTJT-11, TTKT-11

This sensor is suitable for temperature range -200÷550°C, primarily for measurements carried out in tanks and pipelines, in all these places where mounting of a threaded process connection would be problematic. The temperature sensor design... max. temperature +550 °C
thermowell diameter: Ø11
mounting method: DN20PN16 flange with a rebate
temperature transmitter mounted into connection head, 4÷20 mA
local LED display mounted into connection head
sensing element: Pt100, Fe-CuNi /J/, NiCr-Ni /K/ Catalogue card Manual +

TTJU-45, TTKU-45

Temperature sensor adequate for mounting in a door of rubber mixer, suitable for measurement of rubber mix. Special narrowed tip enhances speed of sensor reaction to temperature change. Sensor tip is additionally covered with a... max. temperature +300 °C
RTD, TC type: Pt 100,Fe-CuNi/J/, NiCr-Ni/K/
replaceable measuring insert
mounting: in rubber mixer Catalog card Manual / DTR +

TOPSWG-11, TTJSWG-11, TTKSWG-11

Sensor suitable for temperature measurements, primarily in industrial pressure tanks, in all these places where mounting of a threaded process connection would be problematic. The temperature sensor design (replaceable measuring insert) is suitable for various... max. temperature +1000 °C
replaceable measuring insert
mounting method: pressure thermowell
temperature transmitter mounted into connection head, 4÷20 mA
local LED display mounted into connection head
sensing element: Pt100, Fe-CuNi /J/, NiCr-Ni /K/ Catalogue card Manual +

TOPGI-1., TTJGI-1., TTKGI-1

Sensor without thermowell but with a threaded process connection that enables sensor mounting in the thermowell placed on the object. An adequate sheath of the replaceable measuring insert determines product suitability for specific applications. max. temperature +600 °C
unsheathed immersion part
mounting into a pressure thermowell
temperature transmitter mounted into connection head, 4÷20 mA
local LED display mounted into connection head
sensing element: Pt100, Fe-CuNi /J/, NiCr-Ni /K/ Catalog card Manual / DTR +

TTJU-11, TTKU-11, TTJUO-11, TTKUO-11

This sensor is suitable for temperature measurements of media with slow temperature changes. Sensor sheath made of heat-resistant or/and creep-resistant steel enables temperature measurement of e.g. burned gases and exhaust gases in furnaces. max. temperature +1200 °C
TC type: Fe-CuNi/J/, NiCr-Ni/K/
thermowell diameter Ø22 mm
mounting - mounting brackets
control hole Ø4 mm (for TTJ/KUO-11) Catalog card Manual / DTR +

TTJU-1, TTKU-1

This sensor is suitable for temperature measurements of media with slow temperature changes. Thermowell made of heat-resistant or/and creep-resistant steel enables temperature measurement of e.g. burned  gases and exhaust gases in furnaces. max. temperature +1150 °C
TC type: Fe-CuNi /J/, NiCr-Ni /K/
thermowell diameters Ø20, Ø22 mm
mounting- mounting brackets Catalog card Manual / DTR +

TTJK-1, TTKK-1

This sensor is suitable for temperature measurements of media with slow temperature changes. Thermowell made of heat-resistant or/and creep-resistant steel enables temperature measurement of e.g. burned  gases and exhaust gases in furnaces. max. temperature +1150 °C
TC type: Fe-CuNi /J/, NiCr-Ni /K/
angular version
thermowell diameter Ø20 mm
mounting - compression fitting Catalog card Manual / DTR +